842] Sip Station Information - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 842] SIP STATION INFORMATION

2 4 4 B
This MMC provides a means of registering the SIP with the OfficeServ 7000 series system.
No. Parameter
0 REGISTERED
IP ADDRESS
0 USER ID
2 USER PSWD
TONE SRC
CALL WAIT
8 PHONE TYPE
D EFAULT DATA
9 9 6 B
REGISTERED
IP ADDRESS
USER ID
USER PSWD
TONE SRC
CALL WAIT
PHONE TYPE
2-378
This indicates whether the corresponding standard SIP terminal is
registered.
IP address of IP phone
When phone is registered, user ID for checking user
When phone is registered, user password for checking user
Designate whether to use the holding tone of the system or to use
the holding tone of the SIP terminal when connecting the call via
the SIP terminal.
0. USE SYSTEM TONE = Use the tone of the system for the hold-
ing tone and for the ring back tone in some ring back status
(CALLBACK, etc.). When using the tone of the system, in case of
the calls which do not use the MGI such as the call between the
SIP terminals or the call with the IP phone, the holding tone (ring
back tone) is emitted by allocating the MGI.
1. USE SIPP TONE = Use the own tone of the SIP terminal.
This indicates whether to receive the second call without treating it
as the busy status when the second call is received in the SIP ter-
minal. (DISABLE / ENABLE)
This indicates the manufacturer of the standard SIP terminal.
In case of the terminals other than the Samsung standard SIP ter-
minals, registration is limited to the number allocated according to
the LICENSE KEY entered in the MMC841.
(DISCONNECTED / SAMSUNG SIPP / NON SAMSUNG SIPP)
Parameter
Description
Default
YES
-
Initial IP Phone Number(e.g., 3601)
0000
USE SYSTEM TONE
DISABLE
SAMSUNG
Samsung Business Communications