432] Set H-Trk - Samsung OfficeServ 7000 Series Programming Manual

[ 432] SET H-TRK

1 2 4 B
This MMC is used to select the type of signalling for each H- trunk. There are three
operation types available.(E & M, DID, R/D)
MMC [413]
This MMC is not shown in OfficeServ 7100
OfficeServ 7030
D EFAULT DATA
5 9 9 B
E & M
A CTION
6 0 0 B
1) Press Transfer button and enter 432.
Display shows:
2) Enter desired trunk number.(e.g., 705)
OR
Press Volume button to make selection.
Press Right Soft button to move cursor.
OR
Select all trunks.
3) Press Volume button to select trunk type and
press Right Soft button to move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
6 0 1 B
NONE
Samsung Business Communications
does not support H-trunk card.
CHAPTER 2. MMC Programming
/ OfficeServ 7030 . OfficeServ 7100
DISPLAY
[ 7 0 1] SET H-TRK
U U
E&M
[705] SET H-TRK
E&M
[ALL] SET H-TRK
E&M
[705] SET H-TRK
D ID
U U
/
2-149