716] Uk Lcr Option - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 716] UK LCR OPTION

1 7 5 B
This MMC provides UK LCR options.
No Option
0 NETWORK CODE
1 PIN CODE
2 CCC OPTION
3 STATION PIN NO.
D EFAULT DATA
7 6 7 B
SEE DESCRIPTION
A CTION
7 6 8 B
1) Press Transfer button and enter 716.
Display shows:
2) Enter option number 0-3.
OR
Press Volume buttons to select number
and press Right Soft button to move cursor.
3) Enter number 0-16.
OR
Press Volume buttons to select number
and press Right Soft button to move cursor.
4) Enter network access code via dial keypad.
2-236
This table is used to network access code when the call is routed to
the secondary network. This table contains up to 16 entries. Each
code has 4 digits maximum in length and use option for None, CCC, PIN
or Both.(Default: all codes are empty and all use options are none)
0 NONE: This code doesn't use.
1 CCC: This code uses with Call Cast Code(CCC).
2 PIN: This code uses with PIN Code.
3 BOTH: This code uses with PIN code and Call Cast Code.
This table is used to PIN code when the call is routed to the secondary
network. This table contains up to 4 entries and each code has 10
digits maximum in length.(Default: all tables are empty)
This is used to which number used for Call Cost Code.
(Default: Station Number)
0 STATION NUMBER: Station number uses for Call Cost Code.
1 NONE: Doesn't use Call Cost Code.
This is assigned to PIN code table number for each station
number.(Default: all stations are 1)
Description
DISPLAY
N E TWORK CODE
U U
01: USE:NONE
NETWORK CODE
0 1 : USE:NONE
U U
NETWORK CODE
02:_ USE:NONE
NETWORK CODE
02:1234 USE:
Samsung Business Communications
N O NE
U U