Samsung OfficeServ 7000 Series Programming Manual page 136

CHAPTER 2. MMC Programming
D EFAULT DATA
4 8 1 B
T : F-STN
C : F-STN
A CTION
4 8 2 B
1) Press the [Transfer] button and [316] button.
2) Press an extension number or a trunk line number.
(e.g., 202)
Or, select the extension or trunk by pressing
the [Volume] button and move the cursor by pressing
the [Right] Soft button.
3) Enter a ring tone ([0]-[8]).
(Press [0] to enter NO).
Or, select the ring tone by pressing the
[Volume] button and press the [Right] Soft button.
4) Enter a ring cadence ([0]-[5]).
(Press [0] to enter NO).
Or, press the [volume] button to select the
ring cadence and press the [Right] Soft button.
5) Enter a priority ([0]-[9]).
(Press [0] to enter NO).
Or, press the [volume] button to select the
ring cadence and press the [Right] Soft button.
6) Press the [Transfer] button to store the data and com-
plete the
procedure or press the [Speaker] button to store the
data.
R ELATED ITEMS
4 8 3 B
Program 111
2-94
Specify Ring Tone
DISPLAY
[ 2 0 1] DIST.RING
U U
DGP TONE :NONE
[202] DIST.RING
D G P TONE :NONE
U U
[202] DIST.RING
DGP TONE : N O NE
U U
[202] DIST.RING
SLT RING : N O NE
U U
[202] DIST.RING
PRIORITY :NO
Samsung Business Communications