752] Auto Record - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 752] AUTO RECORD

1 9 3 B
This MMC is only used for the Samsung Built-In Voice Mail card. Specific stations in the
phone system can be assigned to automatically record conversations. When this option is
set, all incoming, all outgoing, or all calls(incoming and outgoing) can be recorded.
In this MMC you can assign:
Station number: Which station can use this feature.
Mailbox number: What mailbox the conversations are recorded in.
I, O or B: What type of calls are recorded.(in, out or both)
Voice mail port number: What port is dedicated to the station.
Before using the Auto Record feature
Before using the Auto Record feature, make sure that you are not violating any
laws. Samsung is not responsible for any illegal use of this feature.
C ONDITIONS
8 2 7 B
A maximum of eight stations can use this feature at one time. The same port cannot be
assigned to more than one station. Attempts to do this will result in an error message.
When a Voice Mail port is assigned here, it is automatically removed from the Voice Mail
group defined in MMC 601.
D EFAULT DATA
8 2 8 B
NONE
A CTION
8 2 9 B
1) Press Transfer button and enter 752.
Display shows:
2) Dial station number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Dial mailbox number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
2-278
DISPLAY
AUTO RECORD
STN: 2 0 1 MB:NONE
U U
AUTO RECORD
STN: 2 0 1 MB:NONE
U U
AUTO RECORD
STN:201 MB: 2 0 1
U U
Samsung Business Communications