853] Maintenance Busy - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 853] MAINTENANCE BUSY

2 5 3 B
This MMC is used to place stations, trunks and common resources equipment in a mainte-
nance busy condition. This can be used to isolate suspected intermittent problems. Stations
placed in maintenance busy will behave like a station in DND when called. The calling sta-
tions display will show 'MADE BUSY'. Stations receiving DID or E&M type calls will re-
ceive a DND/ No more calls tone. The station display will still function with station and
date.
When the busy station is accessed, it will function like a 'locked all' station. Trunks made
busy cannot originate calls. Ring down type trunks will still ring the programmed destina-
tion. Common resource equipment such as DSPs, CID DSPs and miscellaneous equipment
such as page ports and voice mail card ports can also be placed in a maintenance busy state.
MAINTENANCE BUSY OPTIONS
No
0 TRK
1 STN
2 PAGE
4 DTMFR
5 CID
6 R2MFC
7 CONF
8 MGI
DTMFR/CID/R2MFC DSP
If DTMFR, CID or R2MFC is selected when DSP is not mounted, display will
show NONE. If mounted, display will show IDLE by default.
D EFAULT DATA
1 0 2 3 B
ALL IDLE
2-404
Option Description
Trunks
Stations
Page Ports
DTMF Receiver(4/DSP)
CID Receiver(14/DSP)
R2MFC Receiver(8/DSP)
(OfficeServ 7100 / OfficeServ 7030
not support R2MFC)
GRP #01-24
MGI Ports
Samsung Business Communications
does