513] Hotel Timer - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 513] HOTEL TIMER

1 4 1 B
This MMC is where the Hotel timers for guest-rooms are set. These are system-wide timers
that affect all rooms. Refer to your Hotel documentation for more details.
No
0 CHECK OUT TIME
1 ROOM CLEAN TIME
2 CHECK IN END TM
C ONDITIONS
6 5 2 B
This function can be used only when the Hotel function is enabled in MMC 813, HOTEL
OPERATION.
D EFAULT DATA
6 5 3 B
NONE
A CTION
6 5 4 B
1) Press Transfer button and enter 513.
Display shows:
2) Select the timer using the Volume buttons.
3) Enter new time using 24-hour clock format
system returns to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to save and advance to next MMC.
R ELATED ITEMS
6 5 5 B
NONE
2-180
Item
If a room is occupied after the checkout time, an additional day's
room charge will be automatically added to the room bill.(If a
room is flagged as Occupied and HOLD then the additional day's
room charge will not be added. Setting a room status to HOLD
allows a late checkout to be performed.)
This is the time each day that the system will flag all occupied
rooms as NEEDS CLEANING.
This is used to decide if an additional day's room charge will be
automatically added to the room bill when the first Check Out Time is
reached. For example, if you set the Check In End time as 5 am, all
rooms checked in before 5 am will be automatically charged an extra
day at the Check Out Time(which might be, say, 11 am). Rooms
checked in after 5 am will not be charged extra until the next day, if still
occupied at the Check Out Time.
Description
DISPLAY
CHECK OUT TIME
HH:MM : :
ROOM CLEAN TIME
HH:MM : :
ROOM CLEAN TIME
HH:MM : 11:30
Samsung Business Communications