Samsung OfficeServ 7000 Series Programming Manual page 406

CHAPTER 2. MMC Programming
29 VIRTUAL RBT
30 CODEC
NEGO
31 DTMF TYPE
D EFAULT DATA
9 8 0 B
SEE DESCRIPTION
A CTION
9 8 1 B
1) Press Transfer button and enter 834.
Display shows the first option.
2) Enter SIP option number 00-38(e.g., 01) via dial
keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
3) Enter SIP option data via dial keypad.
OR
Press Volume button to make selection and press
Right Soft button to move cursor.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
9 8 2 B
MMC 323
MMC 405
2-364
the TO header or Request URI in the incoming INVITE
message.
When enabled, an outbound SIP trunk call will receive
simulated ringback from the OfficeServ as soon as Of-
ficeServ receives 18x message from the SIP UA. If dis-
abled, then actual ringback is received from remote party.
This MMC is not shown in OfficeServ 7100/ OfficeServ
7030.
When disabled, the codec used will be the one selected
in mmc 835 (MGI settings). When enabled, the codec
used for the SIP call will be auto negotiated with the SIP
carrier or remote SIP UA.
This option selects the DTMF signaling method during a
SIP trunk call.
This MMC is not shown in OfficeServ 7100/ OfficeServ
7030.
CALLING PARTY NUMBER
TRUNK CO TEL NUMBER
Disable
DISABLE
Inband (In
voice)
DISPLAY
G A TEWAY CALL ID
U U
1234
CALLER ID TYPE
ANI
C A LLER ID TYPE
U U
IP
Samsung Business Communications