705] Assign System Speed Dial - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 705] ASSIGN SYSTEM SPEED DIAL

1 6 4 B
Enables the assignment of system speed dialling numbers. There are up to 500 entries
available for programming.(or 950 entries if set in MMC 861 SYSTEM OPTIONS) Each
speed dial number consists of a trunk or trunk group access code followed by a separator
and up to 24 digits to be dialled. These dialled digits may consist of 0-9, and #. If the
system recognizes a valid trunk or trunk group access number, it will automatically insert
the separator.
NOTE: If 500 entries are allowed, the bin numbers are 500-999; if 950 entries are allowed,
the bin numbers are 050-999.
D EFAULT DATA
7 2 9 B
NONE
P ROGRAM BUTTONS
7 3 0 B
B
C
D
E
F
ANS/RLS
A CTION
7 3 1 B
1) Press Transfer button and enter 705.
Display shows:
2) Dial speed index desired.(e.g., 505)
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Enter access code(e.g., 9) plus the phone
number up to 24 digits(digits will scroll under)
and press Right Soft button to return to step 2.
4) Press F key to toggle to MMC 706 step 3 to enter
name.
2-218
Used to insert a flash code 'F'
Used to insert a pause code 'P'
Used to insert a pulse/tone conversion code 'C'.
Used to mask/unmask following digits-shows as '[' or ']'
Used to enter name for speed dial bin(see MMC 706)
Used to save the speed dial number and name to the CID translation
table(MMC 728)
DISPLAY
SYS SPEED DIAL
5 0 0:
U U
SYS SPEED DIAL
505:
SYS SPEED DIAL
505:9–12122345678 9
U U
SYS SPEED NAME
505:
Samsung Business Communications