Samsung OfficeServ 7000 Series Programming Manual page 216
Hide thumbs
Also See for OfficeServ 7000 Series:
- Programming manual (487 pages) ,
- User manual (193 pages) ,
- System administration manual (46 pages)
Table of Contents
Advertisement
CHAPTER 2. MMC Programming
Ring Plan 1
Ring Plan 1 is the default Ring Plan for each day. If no Ring Plan destination is
entered, the operator group is the default destination.
D EFAULT DATA
6 3 6 B
START: NONE
END: NONE
A CTION
6 3 7 B
1) Press Transfer button and enter 507.
Display shows:
2) Dial day number.(0-6, e.g., 3 for Weds)
OR
Press Volume button to select day.
Press Right Soft button to advance cursor to step 3.
3) Dial ring plan number.(1-6, e.g., 2)
OR
Press Volume button to select day.
Press Right Soft button to advance cursor to step 4.
4) Dial start time.(e.g., 1030)
If valid, cursor moves to end time.
Enter end time.
If valid, system returns to step 2.
Begin again.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
6 3 8 B
MMC 722
MMC 723
2-174
STATION KEY PROGRAMMING
SYSTEM KEY PROGRAMMING
DISPLAY
RING PLAN (SUN:1)
ST:
END:
RING PLAN (WED:1)
ST:
END:
RING PLAN (WED:2)
ST:_
END:
RING PLAN (WED:1)
ST:1030 END:1800
Samsung Business Communications
Advertisement
Table of Contents
