Samsung OfficeServ 7000 Series Programming Manual page 444

CHAPTER 2. MMC Programming
No Code
MNG--
89 MNG01
90 MNG02
91 MNG03
92 MNG04
93 MNG05
94 MNG06
D EFAULT DATA
1 0 2 0 B
ALL OFF
A CTION
1 0 2 1 B
1) Press Transfer button and enter 852.
Display shows:
2) Enter desired Alarm Display number.(e.g., 64)
OR
Press Volume buttons to select desired option and
press Right Soft button to advance the cursor.
3) To select if the alarm is active, press 1 for
YES and 0 for NO.
An entry will return the cursor to step 2.
OR
Press Volume buttons to make selection and press
Right Soft button to save and return to step 2.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
2-402
Alarm Name
Minor Error Minor Fault without Alarm Buffer saving
Phone Discon- Indicates the Phone is disconnected.
nect Alarm Data = Tel number or Cx-Syy-Pzz
Phone Connect Indicates the Phone is connected.
Alarm Data = Tel number or Cx-Syy-Pzz
Off Hook Alarm Indicates Extension Off Hook Alarm timer has expired.
Alarm Data = Tel number or Cx-Syy-Pzz
On Hook Indicates the Off Hook Alarm Extension is on hook.
Alarm Data = Tel number or Cx-Syy-Pzz
MGI Packet Loss Indicates the MGI connection RTP packet loss is more
than 10 %.
Alarm Data = Tel number or Cx-Syy-Pzz
MGI Packet Delay Indicates the MGI connection RTP packet delay is more
than 500 ms.
Alarm Data = Tel number or Cx-Syy-Pzz
(continued)
Definition
DISPLAY
01:MJA01 ACT:OFF
POR Restart
64:MNF01 ACT:OFF
Card Out
64:MNF01 ACT:ON
Card Out
Samsung Business Communications