Samsung OfficeServ 7000 Series Programming Manual page 175

C ONDITIONS
5 6 6 B
A BRI card must be installed in the system. Or, the 'NO BRI CARD' message is
displayed.
If any changes are made in this MMC, the BRI card that is affected by these changes
MUST be restarted using MMC 418 in order for the changes to become effective.
D EFAULT DATA
5 6 7 B
For BRI Ports programmed as Trunks:
CHANNEL ANY: YES
BRI MODE: P-P DDI
DLSEND: OVERLAP
CLIP TABLE: NONE
NB TYPE: NATIONAL
NB PLAN: ISDN
CLIR w NUMB : OFF
NO CH BUSY : OFF
CD PLAN : UNKNOWN
CD TYPE : UNKNOWN
TIME SYNC : OFF
For BRI Ports programmed as Stations:
CHANNEL ANY: YES
POWER FEED: NO
A CTION
5 6 8 B
1) Press Transfer button and enter 419.
Display shows first BRI channel.
2) Dial BRI trunk number.(e.g., 727)
OR
Press Volume button to select BRI trunk and
press Right Soft button.
3) Select option item.
OR
Press Volume button to select option item and
press Right Soft button.
Samsung Business Communications
CHAPTER 2. MMC Programming
DISPLAY
[ 7 2 5] BRI-TRK
U U
CHANNEL ANY:YES
[ 7 2 7] BRI-TRK
U U
CHANNEL ANY:YES
[727] BRI-TRK
C H ANNEL ANY:NO
U U
[727] BRI-TRK
B R I MODE:P-M MSN
U U
[727] BRI-TRK
D L SEND :OVERLAP
U U
[727] BRI-TRK
CLIP TABLE :NONE
2-133