501] System Timers - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 501] SYSTEM TIMERS

1 3 0 B
Allows the technician to adjust individual timers as necessary.
T IMER TABLE
6 1 5 B
Timer Name
ALARM TIME
ALERT TONE TIME
ALM REM.INTERVAL
ALM REM RING OFF
ATT. RECALL TIME
AUTO REDIAL INT.
AUTO REDIAL RLS.
BOOTH TIME OUT
(Hotel application only)
CALLBACK NO ANS
CAMP ON RECALL
CID MSG RECEIVE
CID DSP ALLOC TM
CLI DISPLAY TIME
2-158
Default Range Unit
100 0-2500 MIN
1000 100-2500
MSEC
25 1-250 SEC
10 1-25 SEC
30 0-250 SEC
30 1-250 SEC
45 1-250 SEC
005 0-250 MIN
30 1-250 SEC
30 0-250 SEC
6 1-25 SEC
500 000-500
MSEC
5 1-25 SEC
Description
This is the time the system alarm key will start
ringing after the alarm key has been silenced.
This timer sets the duration of the attention
tone preceding a call to a phone in the Voice
Announce or Auto Answer mode. This tone
will also precede a forced Auto Answer call.
This timer controls the time between ring
attempts at a station when alarm reminder is
set.
This timer controls the length of the ring cycle
duration when an alarm reminder is set at a
station.
This controls how long a transfer recall will
ring at a station before recalling the operator.
This timer controls the time between attempts
after RETRY dialling is set on a station.
This timer controls the duration of a Ring No
Answer condition on a retry number dialled
before the auto redial is automatically
cancelled.
Controls the time for which a booth phone is
enabled.
This timer controls the time before the
callback is automatically cancelled when a
callback detects Ring No Answer.
This timer controls the time a camped-on call
will stay at a destination before recalling to the
transferring station.
The amount of time that the system will allow
a valid message from the analogue CID trunk.
Caller ID(CLI) Digital Signal Processor
Allocation timer - the length of time the DSP is
in-circuit to decode analogue Caller ID.
This option is not shown in OfficeServ 7100
OfficeServ 7030.
The amount of time that the Caller ID
information remains on the phone's display.
Samsung Business Communications
/