Samsung OfficeServ 7000 Series Programming Manual page 442

CHAPTER 2. MMC Programming
No Code
61 MJD22
- MJE--
62 MJE01
64 MJE03
65 MJE04
66 MJE05
67 MJE06
68 MJE07
69 MJE08
70 MJE09
71 MJE10
72 MJE11
73 MJE12
74 MJE13
MNF--
75 MNF01
77 MNF02
78 MNF04
2-400
Alarm Name
PCM Recovery Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI Error MGI card Fault
MGI Restart The MGI card has restarted.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI IP Duplicate The MGI card IP address is duplicated.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI NTWK Error The MGI card has blocked because the system detects the
card doesn't respond via network link.
External ping test.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI NTWK Rec The MGI card has restarted because the system detects
the card does respond via network link.
External ping test.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI DSP Error The MGI card DSP has blocked because the system de-
tects the card DSP does not run correctly.
Alarm Data = Cabinet, Slot(Cx-Syy-Pzz)
MGI DSP Run The MGI card DSP has restarted because the system de-
tects the card DSP runs correctly.
Alarm Data = Cabinet, Slot(Cx-Syy-Pzz)
WBS Disconnect Indicates the WBS is disconnected.
Alarm Data = CWBS:xx or BWBS:xx
WBS connect Indicates the WBS is connected.
Alarm Data = CWBS:xx or BWBS:xx
SVMi Restart SVMi Restart
SVMi Halt Whether to halt the SVMi card
SVMi Down Whether to shut down the SVMi card
MGI Self Restart MGI Self Restart
Minor Error Minor Fault with Alarm Buffer saving
Card Out A circuit card mounted in a universal slot has been removed
from service or is not recognized by the system.
Alarm Data = Cabinet, Slot(Cx-Syy)
Card In A circuit card mounted in a universal slot has been re-
turned to service.
Alarm Data = Cabinet, Slot(Cx-Syy)
Trunk Fault Out of service trunk detected via loop detect. Internal CO-
DEC test.
Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz)
(continued)
Definition
Samsung Business Communications