802] Customer Access Mmc Number - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 802] CUSTOMER ACCESS MMC NUMBER

2 0 8 B
Allows the System Administrator(customer) to have access to certain MMCs. For example,
it is required that the customer has access to MMC 102, Call Forward, for call forwarding
but it is not required that the customer has access to MMC 710, LCR Digit Table, for LCR
dial plans.
This MMC is for both tenants.
D EFAULT DATA
8 8 2 B
NONE
A CTION
8 8 3 B
1) Press Transfer button and enter 802.
Display shows:
2) Enter desired tenant number(1-2) via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Enter desired MMC number via dial keypad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
4) Enter 1 for YES or 0 for NO via dial keypad.
OR
Press Volume button to make selection and
press Left Soft button to return to step 3 to
make additional entries.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
8 8 4 B
NONE
2-298
DISPLAY
CUST.USE MMC : 1
U
100:STN LOCK:YES
CUST.USE MMC :1
1 0 0:STN LOCK:YES
U U
CUST.USE MMC :1
102:CALL FWD: Y E S
U U
CUST.USE MMC :1
1 0 2:CALL FWD:NO
U U
Samsung Business Communications