418] Bri And Pri Card Restart - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 418] BRI AND PRI CARD RESTART

1 1 5 B
This MMC is used to restart a BRI or PRI card at the card level or a BRM at the module
level. This action is required to update the processor on the BRI(BRM) or PRI card with
any changes in the card setup MMCs and to put these changes into effect.
C ONDITIONS
5 6 2 B
A BRI card or BRM or TEPRI card or TEPRI2 card must be installed in the system.
Before setting the PRI program, the J2 jumper of the TEPRI or TEPRI2 card must be
set ON to PRI mode.
D EFAULT DATA
5 6 3 B
NONE
A CTION
5 6 4 B
1) Press Transfer button and enter 418.
Display shows first BRI or PRI circuit:
2) Dial first trunk on a BRI or PRI card.(e.g., 733)
OR
Press Volume button to select the first trunk
and press Right Soft button to move the cursor.
3) Dial 1 for YES or 0 for NO.
Pressing 1 will advance to step 4.
4) Dial 1 for YES or 0 for NO.
Pressing 1 or 0 will return to step 2.
5) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
R ELATED ITEMS
5 6 5 B
MMC 419
MMC 420
MMC 423
MMC 424
2-130
BRI OPTIONS
PRI OPTIONS
S/T MODE
BRI S0 MAPPING
DISPLAY
[ 7 2 5] RESTART
U U
CARD RESTART?NO
[733] RESTART
CARD RESTART? N O
U U
[733] RESTART
CARD RESTART? Y E S
U U
[733] RESTART
ARE YOU SURE? Y E S
U U
Samsung Business Communications