839] Sip User - Samsung OfficeServ 7000 Series Programming Manual

[ 839] SIP USER

2 4 1 B
This is the program to register to outbound SIP server on per user bases, using each pair of
username and password.
In-site Information
No Parameter
00 USERNAME
01 AUTH UID
02 AUTH PWD
03 TEL NO
Out-site Information
No Parameter
00 SITE URL
01 TEL NO
02 CLI NAME
03 ROUTING
C ONDITIONS
9 8 6 B
None
D EFAULT DATA
9 8 7 B
None
Samsung Business Communications
Description
Alphanumeric username when registering to interacting
Outbound SIP Server.
This is the username which is used if the authentication
is required from the SIP server. This is the item which is
used for registering the individual number.
This is the password which is used if the authentication is
required from the SIP server. This is the item which is
used for registering the individual number.
This numbers are used to match alphabetical usernames
to internal CLI and DDI numbers. (Matched to CLI for
outgoing, and DDI for Incoming)
Description
When dialed number is matched with TEL NO in this ta-
ble, this value should be put into To-Header in outgoing
INVITE message.
This numbers are used to match with dialed number.
When matched, system considers the dialed number as a
medium for converting from/to values to alphabetical val-
ues specified in SITE URL and CLI NAME in this table.
When dialed number is matched with TEL NO in this ta-
ble, this value should be put into From-Header in outgo-
ing INVITE message.
When dialed number is matched with TEL NO in this ta-
ble, this specifies the SIP CARRIER to which outbound
message is transferring.
CHAPTER 2. MMC Programming
Default
Default
2-367