764] Disa Password - Samsung OfficeServ 7000 Series Programming Manual

[ 764] DISA PASSWORD

2 0 5 B
This is the program to enable the DISA incoming call without entering the DISA password
according to the CID number of the incoming call to the DISA trunk line.
It is available to designate 500 CID numbers, and if the DISA call is received to the CID
number corresponding to the entered CID number, it is available to make a call without en-
tering the password although the MMC210 DISA PSWD is designated as ON.
C ONDITIONS
8 7 0 B
None
D EFAULT DATA
8 7 1 B
None
A CTION
8 7 2 B
1) Press the [Transfer] button and the [764] button.
2) Enter the table number ([001]-[500]).
Otherwise, select the table number by the [Volume]
button.
Move the cursor by pressing the [Right] soft button.
3) Enter the CID number within maximum 16 digits,
and move the cursor by pressing the [Right] soft but-
ton.
4) Press the [Transfer] button to complete the procedure
or press the [Speaker] button to store the data.
R ELATED ITEMS
8 7 3 B
Program 210
Program 410
Samsung Business Communications
Designate the system On/Off.
Extension DISA service
CHAPTER 2. MMC Programming
DISPLAY
DISA PASS ( 0 0 1)
U U
CLI:
DISA PASS ( 0 0 1)
U U
CLI:
DISA PASS (001)
CLI: 1234
2-295