Cabinet Configuration; Figure 1.1 Left Side View Of The Officeserv 7030 Cabinet; Table 1.3 Parts On The Left Side Of The Cabinet - Samsung OfficeServ 7030 Installation Manual

CHAPTER 1. Before Installing

1.5 Cabinet Configuration

The cabinet of the OfficeServ 7030 system has three slots to install the boards.
The descriptions of each part located on the left of the cabinet are listed in the table below.
Power Switch
Power I/O Connector
6

Figure 1.1 Left Side View of the OfficeServ 7030 Cabinet

Table 1.3 Parts on the left side of the cabinet

Part
Turns the power of the OfficeServ 7030 system on/off.
Connector for the power cable connection
Turning off power switch after dismounting MEM
You should dismount MEM before turning off power switch. Use 'Key MMC 817
MEM UMOUNT' when dismounting MEM.
Function
© SAMSUNG Electronics Co., Ltd.