Installing And Replacing Cards; Cabinet Configuration - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL
PART 3. INSTALLING AND REPLACING CARDS
This section describes how to install and replace various cards of the OfficeServ 7200-S system.

3.1 CABINET CONFIGURATION

The OfficeServ 7200-S cabinet has six card slots.
The following boards may be installed in the cabinet slots according to the configuration of the
OfficeServ 7200-S.
Cabinet
Main Cabinet
Checking Slots
The TEPRI/TEPRIa can only be installed on slots 3, 4 and 5 of the system cabinet.
Figure 3.1 Front Panel Configuration
Table 3.1 Applicable Cards per Slot
Slot
Slot 0 MP20S ONLY/WSM
All boards EXCEPT MCP/MP20/MP20S, LCP, TEPRI/TEPRIa,
Slot 1 MGI, MGI-16, MGI-64, SVMi-20E, PLIM/PLIM2, WIM, GWIMT,
GSIMT, 4WLI and 8WLI
All boards EXCEPT MCP/MP20/MP20S, LCP, TEPRI/TEPRIa,
Slot 2 MGI, MGI-16, MGI-64, SVMi-20E, PLIM/PLIM2, WIM, GWIMT,
GSIMT, 4WLI and 8WLI
All boards EXCEPT MCP/MP20/MP20S, LCP, MGI, MGI-16,
Slot 3, 4, 5 MGI-64, SVMi-20E, PLIM/PLIM2, WIM, GWIMT, GSIMT, 4WLI
and 8WLI
3.1
INSTALLATION
PART 3 MAY 2010
Applicable Cards
Home Page