Sip Station Information - Samsung OfficeServ 7000 Series Programming Manual

Call server
Hide thumbs Also See for OfficeServ 7000 Series:
Table of Contents

Advertisement

[842] SIP STATION INFORMATION

This MMC provides a means of registering the SIP with the OfficeServ 7000 series system.
No.
Parameter
0
REGISTERED
-
IP ADDRESS
0
USER ID
2
USER PSWD
-
TONE SRC
-
CALL WAIT
8
PHONE TYPE
9
PUB IPADDR
10
PUB PORT
11
SIG PORT
12
PROTOCOL
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7000 Series Call Server Programming Manual
This indicates whether the corresponding standard SIP terminal is
registered.
IP address of IP phone
When phone is registered, user ID for checking user
When phone is registered, user password for checking user
Designate whether to use the holding tone of the system or to use
the holding tone of the SIP terminal when connecting the call via
the SIP terminal.
0. USE SYSTEM TONE = Use the tone of the system for the
holding tone and for the ring back tone in some ring back status
(CALLBACK, etc.). When using the tone of the system, in case
of the calls which do not use the MGI such as the call between
the SIP terminals or the call with the IP phone, the holding tone
(ring back tone) is emitted by allocating the MGI.
1. USE SIPP TONE = Use the own tone of the SIP terminal.
This indicates whether to receive the second call without treating it
as the busy status when the second call is received in the SIP
terminal. (DISABLE / ENABLE)
This indicates the manufacturer of the standard SIP terminal.
In case of the terminals other than the Samsung standard SIP
terminals, registration is limited to the number allocated according
to the LICENSE KEY entered in the MMC860.
(DISCONNECTED / SAMSUNG PHONE / OTHER SIP PHONE)
These values indicate the IP address and port number of terminals
or access pointers sending REGISTER messages. The 'PUB
IPADDR' value can be different from the 'IP ADDRESS'.
This indicates the port and transport protocol that is used for
signaling by SIP terminals. If signaling port is stored at DB, the SIP
phone can transmit and receive signal although the system restart.
Description
2-399

Advertisement

Table of Contents
loading

Table of Contents