1.6 Card types available with the system
The following cards can be fitted to the OS7030 system, depending on customer
requirements.
Part
4TM
2BM
4DM
4SM
4LM
EPM
Modem
Details of the installation of these cards are shown in the next Chapter.
1.7 System Installation Procedure
The system installation procedure is as follows:
1) Open the cabinet.
2) Remove the cabinet's blanking panels to insert the daughter boards.
3) Insert the daughter boards into the universal slots (slot 2, 3 and 4).
4) Install the cabinet on a wall, if necessary, depending on the installation environment
5) Connect and tie the cables with the cable ties.
6) Connect the AC 200~240 V input power. If necessary, connect Uninterruptible Power
Supply (UPS).
These items are described in detail in Chapter 2.
© SAMSUNG Electronics Co., Ltd.
Table 1.6 Mountable Boards
Max qty per cabinet
1
4 port analogue trunk
1
2 port (4 channel) Basic Rate ISDN card
2
4 port Digital extension
2
4 port analogue extension
2
4 port LAN switch (requires EPM)
1
System expansion card
1
Analogue Modem card (OS7000 type)
OfficeServ 7030 Installation Manual
Description
1-7