Creating A Vpn Instance - Huawei Quidway S9300 Configuration Manual

3 BGP/MPLS IP VPN Configuration
l
l
Data Preparation
To configure the VPN instance, you need the following data.
No.
1
2
3
4
5
6

3.3.2 Creating a VPN Instance

Context
Do as follows on the PE that is connected to a CE.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip vpn-instance vpn-instance-name
A VPN instance is created and the VPN instance view is displayed.
A PE does not have a default VPN instance. Multiple VPN instances can be created on a PE.
The maximum number of VPN instances depends on the product type.
Step 3 Run:
route-distinguisher route-distinguisher
The RD of a VPN instance is configured.
3-6
Configuring routing policies if import or export routing policies need to be applied to the
VPN instance
Configuring tunnel policies if load balancing is required, or the selection sequence of
tunnels is changed (For configuration of tunnel policies, refer to
Management in this manual.)
Data
Name of VPN instance and the RD
(Optional) Description of the VPN instance
VPN target attributes
(Optional) Maximum number of routes allowed by the VPN instance
(Optional) Routing policy that controls transmitting and receiving of VPN routing
information
(Optional) Tunnel policy
NOTE
The name of a VPN instance is case sensitive. For example, "vpn1" and "VPN1" indicate different VPN
instances.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
VPN Tunnel
Issue 03 (2009-08-20)