Configuring Route Reflection For The Routes Of The Bgp Vpn Instance - Huawei Quidway S9300 Configuration Manual
Terabit routing switch
Hide thumbs
Also See for Quidway S9300:
- Configuration manual - network management (630 pages) ,
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages)
Table of Contents
Advertisement
3 BGP/MPLS IP VPN Configuration
l
----End
3.12.4 Configuring Route Reflection for the Routes of the BGP VPN
Instance
Context
Do as follows on the RR.
3-50
5.
Run:
peer group-name connect-interface interface-type interface-number
The interface for establishing the TCP connection is configured. The IP address of the
interface must be the same as the MPLS LSR ID. It is recommended that you specify
a loopback interface to establish the TCP connection.
6.
Run:
ipv4-family vpn-instance vpn-instance-name
The BGP VPN instance view is displayed.
7.
Run:
peer group-name as-number as-number
The peer group of the BGP IPv4 VPN instance is configured.
8.
Run:
peer ip-address group group-name
The peer is added to the peer group.
Configuring the RR to establish an MP-IBGP connection with each client CE
1.
Run:
system-view
The system view is displayed.
2.
Run:
bgp as-number
The BGP view is displayed.
3.
Run:
peer peer-ipv4-address as-number as-number
The client PE is configured as the BGP peer of the RR.
4.
Run:
peer peer-ipv4-address connect-interface interface-type interface-number
The interface for establishing the TCP connection is specified.
5.
Run:
ipv4-family vpn-instance vpn-instance-name
The BGP VPN instance view is displayed.
6.
Run:
peer peer-ipv4-address as-number as-number
The peer of the BGP IPv4 VPN instance is configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
Issue 03 (2009-08-20)
Advertisement
Table of Contents
