Huawei Quidway S9300 Configuration Manual page 451

Terabit routing switch
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
Enable MPLS L2VPN on U-PE1, U-PE2, and S-PE.
Create a dynamic VC connection U-PE1 and a static VC connection on U-PE2. Configure a
mixed switching PW on the S-PE.
# Configure U-PE1.
[U-PE1] mpls l2vpn
[U-PE1] interface vlanif 10
[U-PE1-Vlanif10] mpls l2vc 3.3.3.9 100
[U-PE1-Vlanif10] quit
# Configure S-PE.
[S-PE] mpls l2vpn
[S-PE-l2vpn] quit
[S-PE] mpls switch-l2vc 1.1.1.9 100 between 5.5.5.9 200 trans 200 recv 100
encapsulation vlan
# Configure U-PE2.
[U-PE2] mpls l2vpn
[U-PE2-l2vpn] quit
[U-PE2] pw-template pwt
[U-PE2-pw-template-pwt] peer-address 3.3.3.9
[U-PE2-pw-template-pwt] quit
[U-PE2] interface vlanif 60
[U-PE2-Vlanif60] mpls static-l2vc pw-template pwt 200 transmit-vpn-label 100
receive-vpn-label 200
[U-PE2-Vlanif60] quit
Step 6 Verify the configuration.
Display information about the L2VPN connection on PE. You can see that an L2VC is set up
and the VC status is Up.
Take the display on U-PE1 and S-PE for example.
<U-PE1> display mpls l2vc interface vlanif 10
*client interface
session state
AC state
VC state
VC ID
VC type
destination
local group ID
local VC label
local AC OAM State
local PSN State
local forwarding state : forwarding
remote AC OAM state
remote PSN state
remote forwarding state: forwarding
BFD for PW
manual fault
active state
forwarding entry
link state
local VC MTU
local VCCV
remote VCCV
local control word
Issue 03 (2009-08-20)
NOTE
When configuring mixed switching PW, note that ip-address vc-id on the left of between specifies the
dynamic PW, and ip-address vc-id on the right of between specifies the static PW. They cannot be
interchanged.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: Vlanif10 is up
: up
: up
: up
: 100
: VLAN
: 3.3.3.9
: 0
remote group ID
: 21504
remote VC label
: up
: up
: up
: up
: unavailable
: not set
: active
: exist
: up
: 1500
remote VC MTU
: Disable
: Disable
: disable
remote control word
5 PWE3 Configuration
: 0
: 21504
: 1500
: disable
5-69

Advertisement

Table of Contents
loading

Table of Contents