Huawei Quidway S9300 Configuration Manual page 162
Terabit routing switch
Hide thumbs
Also See for Quidway S9300:
- Configuration manual - network management (630 pages) ,
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages)
Table of Contents
Advertisement
3 BGP/MPLS IP VPN Configuration
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Configure IGP on the MPLS backbone network so that PEs and P can interwork.
# Configure PE1.
<Quidway> system-view
[Quidway] sysname PE1
[PE1] interface loopback 1
[PE1-LoopBack1] ip address 1.1.1.9 32
[PE1-LoopBack1] quit
[PE1] vlan batch 10 20 30
[PE1] interface GigabitEthernet 1/0/0
[PE1-GigabitEthernet1/0/0]port hybrid pvid vlan 10
[PE1-GigabitEthernet1/0/0]port hybrid untagged vlan 10
[PE1-GigabitEthernet1/0/0] quit
[PE1] interface GigabitEthernet 2/0/0
[PE1-GigabitEthernet2/0/0]port hybrid pvid vlan 20
[PE1-GigabitEthernet2/0/0]port hybrid untagged vlan 20
[PE1-GigabitEthernet2/0/0] quit
[PE1] interface GigabitEthernet 3/0/0
[PE1-GigabitEthernet3/0/0]port hybrid pvid vlan 30
[PE1-GigabitEthernet3/0/0]port hybrid untagged vlan 30
[PE1-GigabitEthernet3/0/0] quit
[PE1] interface vlanif 30
[PE1-Vlanif30] ip address 172.1.1.1 24
[PE1-Vlanif30] quit
[PE1] ospf
[PE1-ospf-1] area 0
[PE1-ospf-1-area-0.0.0.0] network 172.1.1.0 0.0.0.255
[PE1-ospf-1-area-0.0.0.0] network 1.1.1.9 0.0.0.0
[PE1-ospf-1-area-0.0.0.0] quit
[PE1-ospf-1] quit
# Configure the P.
<Quidway> system-view
[Quidway] sysname P
[P] interface loopback 1
[P-LoopBack1] ip address 2.2.2.9 32
[P-LoopBack1] quit
[P] vlan 30 60
[P] interface GigabitEthernet 1/0/0
3-58
Configure VPN instances on the PEs connected to CEs on the backbone network and bind
related VPNs to the interfaces connected to the CEs.
Configure OSPF on the PEs to implement interconnection between PEs.
Configure the basic MPLS capabilities and LDP and create an MPLS LSP.
Configure MP-IBGP for exchanging routing information between the VPNs.
Configure EBGP for exchanging VPN routing information between the CE and PE.
IDs of the VLANs that the interfaces belong to, as shown in
IP address of each VLAN interface, as shown in
MPLS LSR-IDs of PE and P
RDs of VPN-A and VPN-B
VPN targets of received and sent routes of VPN-A and VPN-B
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
Figure 3-3
Figure 3-3
Issue 03 (2009-08-20)
Advertisement
Table of Contents
