Huawei Quidway S9300 Configuration Manual page 437

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
------------------------------------------------------------------------------
Peer-ID
------------------------------------------------------------------------------
1.1.1.9:0
2.2.2.9:0
4.4.4.9:0
5.5.5.9:0
------------------------------------------------------------------------------
TOTAL: 4 session(s) Found.
LAM : Label Advertisement Mode
<S-PE> display mpls ldp peer
------------------------------------------------------------------------------
Peer-ID
------------------------------------------------------------------------------
1.1.1.9:0
2.2.2.9:0
4.4.4.9:0
5.5.5.9:0
------------------------------------------------------------------------------
TOTAL: 4 Peer(s) Found.
<S-PE> display mpls lsp
----------------------------------------------------------------------
----------------------------------------------------------------------
FEC
3.3.3.9/32
1.1.1.9/32
1.1.1.9/32
2.2.2.9/32
2.2.2.9/32
4.4.4.9/32
4.4.4.9/32
5.5.5.9/32
5.5.5.9/32
Step 5 Create and configure the PW template.
Create a PW template on each U-PE. Enable the CW and LSP ping function.
# Configure U-PE1.
[U-PE1] pw-template pwt
[U-PE1-pw-template-pwt] peer-address 3.3.3.9
[U-PE1-pw-template-pwt] control-word
[U-PE1-pw-template-pwt] vccv cc cw cv lsp-ping
[U-PE1-pw-template-pwt] quit
# Configure U-PE2.
[U-PE2] pw-template pwt
[U-PE2-pw-template-pwt] peer-address 3.3.3.9
[U-PE2-pw-template-pwt] control-word
[U-PE2-pw-template-pwt] vccv cc cw cv lsp-ping
[U-PE2-pw-template-pwt] quit
Step 6 Create a VC connection.
Enable MPLS L2VPN on U-PE1, U-PE2, and S-PE.
Issue 03 (2009-08-20)
LDP Session(s) in Public Network
Status
Operational DU
Operational DU
Operational DU
Operational DU
LDP Peer Information in Public network
LSP Information: LDP LSP
In/Out Label
3/NULL
NULL/1024
1024/1024
NULL/3
1025/3
NULL/3
1027/3
NULL/1027
1026/1027
NOTE
You can configure a dynamic PW without using a PW template. If the PW template is not used, PW
connectivity cannot be verified and path information of the PW cannot be collected. That is, the ping vc
and tracert vc commands cannot be used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LAM SsnRole
Active
Active
Passive
Passive
SsnAge Unit : DDD:HH:MM
Transport-Address Discovery-Source
1.1.1.9 Remote Peer : 1.1.1.9
2.2.2.9 Vlanif30
4.4.4.9 Vlanif40
5.5.5.9 Remote Peer : 5.5.5.9
In/Out IF
-/-
-/Vlanif30
-/Vlanif30
-/Vlanif30
-/Vlanif30
-/Vlanif40
-/Vlanif40
-/Vlanif40
-/Vlanif40
5 PWE3 Configuration
SsnAge KA-Sent/Rcv
000:00:14 57/57
000:00:14 56/56
000:00:05 22/22
000:00:12 52/52
Vrf Name
5-55