Huawei Quidway S9300 Configuration Manual page 341

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
--- 2.2.2.2 ping statistics ---
Step 3 Enable MPLS and establish the LSP.
Enable MPLS and establish LDP LSP on the ASBR-PE and the PEs in the same AS.
The configuration procedure is not mentioned.
After the configuration, the LDP adjacencies are established between the PE and the ASBR-PEs
in the same AS. Run the display mpls ldp session command on each S9300, and you can find
that the session status is Operational.
Take the display on PE1 for example.
<PE1> display mpls ldp session
---------------------------------------------------------------------
Peer-ID
----------------------------------------------------------------------
2.2.2.2:0
----------------------------------------------------------------------
TOTAL: 1 session(s) Found.
LAM : Label Advertisement Mode
Step 4 Configure IBGP.
Configure MP-IBGP connections between PE1 and ASBR-PE1, and between PE2 and ASBR-
PE2.
# Configure PE1.
[PE1] bgp 100
[PE1-bgp] peer 2.2.2.2 as-number 100
[PE1-bgp] peer 2.2.2.2 connect-interface LoopBack 1
[PE1-bgp] quit
# Configure ASBR-PE1.
[ASBR-PE1] bgp 100
[ASBR-PE1-bgp] peer 1.1.1.1 as-number 100
[ASBR-PE1-bgp] peer 1.1.1.1 connect-interface loopback 1
[ASBR-PE1-bgp] quit
# Configure ASBR-PE2.
[ASBR-PE2] bgp 200
[ASBR-PE2-bgp] peer 4.4.4.4 as-number 200
[ASBR-PE2-bgp] peer 4.4.4.4 connect-interface loopback 1
[ASBR-PE2-bgp] quit
# Configure PE2.
[PE2] bgp 200
[PE2-bgp] peer 3.3.3.3 as-number 200
[PE2-bgp] peer 3.3.3.3 connect-interface loopback 1
[PE2-bgp] quit
After the configuration, run the display bgp peer command, and you can see that the IBGP peer
relation between PE1 and the ASBR-PE in the same AS is in Established state. Take the display
on PE1 for example.
[PE1] display bgp peer
Issue 03 (2009-08-20)
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 60/78/90 ms
LDP Session(s) in Public Network
Status
Operational DU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LAM SsnRole SsnAge
Passive 000:01:03
SsnAge Unit : DDD:HH:MM
4 VLL Configuration
KA-Sent/Rcv
2/2
4-79