Huawei Quidway S9300 Configuration Manual page 254

3 BGP/MPLS IP VPN Configuration
4.
5.
6.
3-150
----------------------------------------------------------------------
Peer-ID Status
----------------------------------------------------------------------
2.2.2.9:0 Operational DU
3.3.3.9:0 Operational DU
----------------------------------------------------------------------
TOTAL: 2 session(s) Found.
LAM : Label Advertisement Mode
[P1] display mpls ldp session
LDP Session(s) in Public Network
----------------------------------------------------------------------
Peer-ID Status
----------------------------------------------------------------------
1.1.1.9:0 Operational DU
3.3.3.9:0 Operational DU
4.4.4.9:0 Operational DU
----------------------------------------------------------------------
TOTAL: 3 session(s) Found.
LAM : Label Advertisement Mode
Configure a VPN instance on PE.
For the configuration procedure, see
VPN. The configuration details are not mentioned here.
Set up EBGP peer relation between the PE and the CE and import VPN routes.
For the configuration procedure, see
VPN. The configuration details are not mentioned here.
Set up the MP-IBGP peer relation between PEs and RRs.
# Configure PE1.
<PE1> system-view
[PE1] bgp 100
[PE1-bgp] peer 2.2.2.9 as-number 100
[PE1-bgp] peer 2.2.2.9 connect-interface loopback 1
[PE1-bgp] peer 3.3.3.9 as-number 100
[PE1-bgp] peer 3.3.3.9 connect-interface loopback 1
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp-af-vpnv4] peer 2.2.2.9 enable
[PE1-bgp-af-vpnv4] peer 3.3.3.9 enable
[PE1-bgp-af-vpnv4] quit
# Configure P1.
<P1> system-view
[P1] bgp 100
[P1-bgp] group P1 internal
[P1-bgp] peer P1 connect-interface loopback 1
[P1-bgp] peer 1.1.1.9 group P1
[P1-bgp] peer 3.3.3.9 group P1
[P1-bgp] peer 4.4.4.9 group P1
[P1-bgp] ipv4-family vpnv4
[P1-bgp-af-vpnv4] peer P1 enable
[P1-bgp-af-vpnv4] peer 1.1.1.9 group P1
[P1-bgp-af-vpnv4] peer 3.3.3.9 group P1
[P1-bgp-af-vpnv4] peer 4.4.4.9 group P1
[P1-bgp-af-vpnv4] quit
[P1-bgp] quit
# Configure P2.
<P2> system-view
[P2] bgp 100
[P2-bgp] group P2 internal
[P2-bgp] peer P2 connect-interface loopback 1
[P2-bgp] peer 1.1.1.9 group P2
[P2-bgp] peer 2.2.2.9 group P2
[P2-bgp] peer 4.4.4.9 group P2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
LAM SsnRole SsnAge
Passive 000:00:01
Passive 000:00:00
SsnAge Unit : DDD:HH:MM
LAM SsnRole SsnAge
Active 000:00:02
Passive 000:00:01
Passive 000:00:00
SsnAge Unit : DDD:HH:MM
Example for Configuring the BGP/MPLS IP
Example for Configuring the BGP/MPLS IP
Configuration Guide - VPN
KA-Sent/Rcv
8/8
4/4
KA-Sent/Rcv
11/11
8/8
4/4
Issue 03 (2009-08-20)