Vpn Tunnel Management - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
About This Chapter
This chapter describes the configuration procedures of tunnel interfaces and tunnel policies.
1.1 Introduction to VPN Tunnels
This section provides an overview of tunnel management, and describes the different types of
tunnel policies and their implementation procedure.
1.2 VPN Tunnel Features Supported by the S9300
This section describes the VPN tunnel features supported by the S9300.
1.3 Configuring the Tunnel Interface
This section describes how to configure the tunnel interfaces. These tunnel interfaces are applied
to the GRE tunnels and MPLS TE tunnels.
1.4 Configuring the Tunnel Policy Applied to L3VPN (Select-Sequence)
This section describes how to configure the tunnel policy in select-sequence mode and how to
apply the policy to the L3VPN.
1.5 Configuring the Tunnel Policy Applied to L2VPN (Select-Sequence)
This section describes how to configure tunnel policies in select-sequence mode and how to
apply the tunnel policies to an L2VPN in SVC, Martini, or Kompella mode.
1.6 Binding the Primary Tunnel for L3VPN
This section describes how to configure a dedicated tunnel for the L3VPN.
1.7 Binding the Primary Tunnel for L2VPN
This section describes how to configure dedicated tunnels for a Martini L2VPN.
1.8 Maintaining the VPN Tunnel
This section describes how to debug VPN tunnels and display the operation status of the VPN
tunnels.
1.9 Configuration Examples
This section provides examples for using tunnel policies.
Issue 03 (2009-08-20)
1

VPN Tunnel Management

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 VPN Tunnel Management
1-1