Huawei Quidway S9300 Configuration Manual page 545

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
Configuration Files
l
Issue 03 (2009-08-20)
Service Class
Color
DomainId
Domain Name
VSI State
VSI ID
*Peer Router ID
VC Label
Peer Type
Session
Tunnel ID
*Peer Router ID
VC Label
Peer Type
Tunnel ID
**PW Information:
*Peer Ip Address
PW State
Local VC Label
Remote VC Label
PW Type
Tunnel ID
*Peer Ip Address
PW State
Local VC Label
Remote VC Label
PW Type
Tunnel ID
CE1 and CE2, which reside in the same network segment, can ping each other successfully.
After you run the shutdown command on VLANIF 10 (to which the VSI is bound) of
UPE1, CE1 and CE2 cannot ping each other successfully. This indicates that user data is
transmitted through the PW of this VSI.
Before VLANIF 20 of SPE1 is shut down, check the MAC addresses learnt by the VSI on
SPE2.
<SPE2> display mac-address dynamic
MAC Address VLAN/VSI
----------------------------------------------------------------------------
0000-c101-0102 v100
Total matching items displayed = 2
After VLANIF 20 of SPE1 is shut down, the VSI bound to the static VLL becomes Down.
Check MAC addresses learnt by the VSI on SPE2, and you can find that one MAC address
learned from VLANIF 20 is deleted.
<SPE2> display mac-address dynamic
MAC Address VLAN/VSI
Lsp
----------------------------------------------------------------------------
Total matching items displayed = 0
Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: --
: --
: 0
:
: up
: 100
: 3.3.3.9
: 23552
: dynamic
: up
: 0x10021,
: 4.4.4.9
: 100
: static
: 0x20024,
: 4.4.4.9
: up
: 100
: 100
: MEHVPLS
: 0x20024,
: 3.3.3.9
: up
: 23552
: 23552
: label
: 0x10021,
Port
Vlanif20
Port
6 VPLS Configuration
Type Lsp
dynamic 3/3366
Type
6-63