Huawei Quidway S9300 Configuration Manual page 311

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
[PE2-Vlanif30] mpls
[PE2-Vlanif30] mpls ldp
[PE2-Vlanif30] quit
After the configuration, LDP sessions are set up between PE1, P, and PE2. Run the display mpls
ldp session command, and you can see that the status of the LDP session is Operational.
Take the display on PE1 for example:
<PE1> display mpls ldp session
------------------------------------------------------------------------------
Peer-ID
------------------------------------------------------------------------------
2.2.2.9:0
------------------------------------------------------------------------------
TOTAL: 1 session(s) Found.
LAM : Label Advertisement Mode
Run the display mpls ldp lsp command, and you can see the establishment status of the LDP
LSP.
Take the display on PE1 for example:
<PE1> display mpls ldp lsp
------------------------------------------------------------------------------
SN
------------------------------------------------------------------------------
*1
2
3
4
------------------------------------------------------------------------------
TOTAL: 3 Normal LSP(s) Found.
TOTAL: 1 Liberal LSP(s) Found.
A '*' before an LSP means the LSP is not established
A '*' before a Label means the USCB or DSCB is stale
Step 4 Enable MPLS L2VPN and create static VCs on PEs.
# Configure PE1: Create a static VC on VLANIF 10, which is connected to CE1.
[PE1] mpls l2vpn
[PE1-l2vpn] quit
[PE1] interface Vlanif 10
[PE1-Vlanif10] mpls static-l2vc destination 3.3.3.9 transmit-vpn-label 100 receive-
vpn-label 200
[PE1-Vlanif10] quit
# Configure PE2: Create a static VC on GE2/0/0, which is connected to CE2.
[PE2] mpls l2vpn
[PE2-l2vpn] quit
[PE2] interface Vlanif40
[PE2-Vlanif40] mpls static-l2vc destination 1.1.1.9 transmit-vpn-label 200 receive-
vpn-label 100
[PE2-Vlanif40] quit
Step 5 Verify the configuration.
View the L2VPN connection information of the SVC on the PE, and you can see that a static
L2VC connection is established.
Take PE1 for example.
Issue 03 (2009-08-20)
LDP Session(s) in Public Network
Status
Operational DU
DestAddress/Mask In/OutLabel
1.1.1.1/32 Liberal
1.1.1.9/32 3/NULL
2.2.2.9/32 NULL/3
3.3.3.9/32 NULL/1025
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LAM SsnRole SsnAge
Passive 000:00:05
SsnAge Unit : DDD:HH:MM
LDP LSP Information
Next-Hop
127.0.0.1
10.1.1.2
10.1.1.2
4 VLL Configuration
KA-Sent/Rcv
22/22
In/Out-Interface
Vlanif20/InLoop0
-------/Vlanif20
-------/Vlanif20
4-49