Huawei Quidway S9300 Configuration Manual page 344

4 VLL Configuration
tunnel type: lsp
# The display on ASBR-PE2 is as follows:
<ASBR-PE2> display mpls l2vpn connection interface vlanif 30
conn-type: remote
tunnel type: lsp
You can find that reachable routes between CE1 and CE2 exist. Take the display on CE1 for
example.
<CE1> display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destination/Mask
CE1 and CE2 can ping each other.
<CE1> ping 10.1.1.2
PING 10.1.1.2: 56
--- 10.1.1.2 ping statistics ---
----End
4-82
AC OAM state:
BFD for PW session index:
BFD for PW state:
BFD for LSP state:
Local C bit is not set,
,
local vc state:
remote vc state:
local ce-id:
local ce name:
remote ce-id:
intf(state,encap):
peer id:
route-distinguisher:
local vc label:
remote vc label:
tunnel policy:
primary or secondary:
forwardEntry exist or not:
forward entry active or not:true
manual fault set or not:
AC OAM state:
BFD for PW session index:
BFD for PW state:
BFD for LSP state:
Local C bit is not set,
,
Destinations : 5
Proto
10.1.1.0/24 Direct 0
10.1.1.1/32 Direct 0
10.1.1.2/32 Direct 0
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
data bytes, press CTRL_C to break
Reply from 10.1.1.2: bytes=56 Sequence=1 ttl=255 time=125 ms
Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=255 time=125 ms
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=255 time=94 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=255 time=125 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=255 time=125 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 94/118/125 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
up
--
invalid
true
Remote C bit is not set
id: 0x2002000
up
up
3
ce3
4
Vlanif30(up,vlan)
4.4.4.4
200:2
25604
25603
default
primary
true
not set
up
--
invalid
true
Remote C bit is not set
id: 0x2002001
Routes : 5
Pre Cost Flags NextHop
0 D
0 D
0 D 10.1.1.2
0 D
0 D
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
Interface
10.1.1.1 Vlanif10
127.0.0.1 InLoopBack0
Vlanif10
127.0.0.1 InLoopBack0
127.0.0.1 InLoopBack0
Issue 03 (2009-08-20)