Huawei Quidway S9300 Configuration Manual page 306

4 VLL Configuration
After the configuration, display information about the CCC connection on the PEs. You can find
that a remote CCC connection is set up on each of PE1 and PE2 and the status of the connection
is Up.
<PE1> display ccc
total
local
remote ccc vc : 1,
name: CE1-CE2, type: remote, state: up,
intf: Vlanif10 (up), in-label: 100 , out-label: 200 , nexthop: 10.1.1.2
<PE2> display ccc
total
local
remote ccc vc : 1,
name: CE2-CE1, type: remote, state: up,
intf: Vlanif40 (up), in-label: 201 , out-label: 101 , nexthop : 10.2.2.2
Run the display l2vpn ccc-interface vc-type ccc command on PE, and you can see that the VC
type is CCC and the status is Up. Take PE1 for example.
<PE1> display l2vpn ccc-interface vc-type ccc
Total ccc-interface of CCC : 1
up (1), down (0)
Interface
Vlanif10
Run the display mpls lsp command on the P, and you can view the label and interface
information of the two static LSPs.
<P> display mpls lsp
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
FEC
-/-
-/-
Run the display ip routing-table command on the CE, and you can see that CE1 and CE2 can
learn the interface routes of each other. CE1 and CE2 can ping each other.
Take CE1 for example.
<CE1> display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destination/Mask
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56
--- 100.1.1.2 ping statistics ---
4-44
ccc vc : 1
ccc vc : 0, 0 up
1 up
ccc vc : 1
ccc vc : 0, 0 up
1 up
LSP Information: STATIC LSP
In/Out Label
200/201
101/100
Destinations : 5
Proto
100.1.1.0/24 Direct 0
100.1.1.1/32 Direct 0
100.1.1.2/32 Direct 0
127.0.0.0/8 Direct 0
127.0.0.1/32 Direct 0
data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=58 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=67 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=52 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=69 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=92 ms
5 packet(s) transmitted
5 packet(s) received
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Encap Type
vlan
In/Out IF
Vlanif20/Vlanif30
Vlanif30/Vlanif20
Routes : 5
Pre Cost Flags NextHop
0 D 100.1.1.1
0 D 127.0.0.1
0 D 100.1.1.2
0 D 127.0.0.1
0 D 127.0.0.1
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
State VC Type
up ccc
Vrf Name
Interface
Vlanif10
InLoopBack0
Vlanif10
InLoopBack0
InLoopBack0
Issue 03 (2009-08-20)