Example For Configuring A Remote Kompella Connection; Figure 4-9 Networking Diagram For Configuring A Remote Kompella Vll - Huawei Quidway S9300 Configuration Manual

4 VLL Configuration
l

4.11.6 Example for Configuring a Remote Kompella Connection

Networking Requirements
As shown in
interfaces.
A remote Kompella VLL is set up between CE1 and CE2.

Figure 4-9 Networking diagram for configuring a remote Kompella VLL

GE 1/0/0
GE 1/0/0
S9300
PE1
PE2
4-62
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrif tagged vlan 20
#
#
ccc CE1-CE2 interface Vlanif 10 in-label 100 out-label 200 nexthop 10.1.1.2
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
return
Configuration file of CE2
#
sysname CE2
#
vlan batch 20
#
interface Vlanif20
ip address 30.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 20
#
return
Figure 4-9, CE1 and CE2 are respectively connected to PE1 and PE2 through GE
Loopback1
1.1.1.9/32
GE 2/0/0
PE 1
CE 1
Interface
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Loopback1
GigabitEthernet1/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Loopback1
2.2.2.9/32
GE 1/0/0 GE 2/0/0
P
Kompella
Remote
VLANIF interface
VLANIF 10
VLANIF 20
-
VLANIF 30
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
Loopback1
3.3.3.9/32
GE 1/0/0
GE 2/0/0
PE 2
GE 1/0/0
CE 2
IP address
-
168.1.1.1/24
1.1.1.9/32
169.1.1.2/24
Issue 03 (2009-08-20)