Huawei Quidway S9300 Configuration Manual page 375

Terabit routing switch
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
tunnel type: cr lsp,
conn-type: remote
tunnel type: lsp
Reroute policy
Reason of last reroute : --
Time of last reroute
delay timer ID
resume timer ID
Remove the fault manually set on VLANIF 30 of PE3.
[PE3] interface vlanif 30
[PE3-Vlanif30] shutdown
The status of the primary VC becomes Down. The forwarding state of the master PW becomes
False, and that of the backup PW becomes True. Take the display on PE1 for example.
<PE1> display mpls l2vpn connection interface vlanif 10
conn-type: remote
tunnel type: cr lsp,
conn-type: remote
Issue 03 (2009-08-20)
AC OAM state:
BFD for PW session index:
BFD for PW state:
BFD for LSP state:
Local C bit is set,
local vc state:
remote vc state:
local ce-id:
local ce name:
remote ce-id:
intf(state,encap):
peer id:
route-distinguisher:
local vc label:
remote vc label:
tunnel policy:
primary or secondary:
forward entry exist or not:
forward entry active or not:false
manual fault set or not:
AC OAM state:
BFD for PW session index:
BFD for PW state:
BFD for LSP state:
Local C bit is set,
,
: delay 30 s, resume 0 s
: -- days, -- hours, -- minutes, -- seconds
: --
: --
local vc state:
remote vc state:
local ce-id:
local ce name:
remote ce-id:
intf(state,encap):
peer id:
route-distinguisher:
local vc label:
remote vc label:
tunnel policy:
primary or secondary:
forwardEntry exist or not:
forward entry active or not:false
manual fault set or not:
AC OAM state:
BFD for PW session index:
BFD for PW state:
BFD for LSP state:
Local C bit is set,
local vc state:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
up
--
invalid
true
Remote C bit is set
id: 0x1003d
up
up
1
ce1
3
Vlanif10(up,vlan)
2.2.2.2
100:3
25603
25601
default
secondary
true
not set
up
--
invalid
true
Remote C bit is set
id: 0x10028
rest time :--
rest time :--
up
down
1
ce1
2
Vlanif10(up,vlan)
3.3.3.3
100:2
25602
25601
p1
primary
false
not set
up
--
down
true
Remote C bit is set
id: 0x1003d
up
4 VLL Configuration
4-113

Advertisement

Table of Contents
loading

Table of Contents