Huawei Quidway S9300 Configuration Manual page 542
Terabit routing switch
Hide thumbs
Also See for Quidway S9300:
- Configuration manual - network management (630 pages) ,
- Configuration manual (603 pages) ,
- Configuration manual - multicast (262 pages)
Table of Contents
Advertisement
6 VPLS Configuration
4.
6-60
[P] quit
[P] mpls ldp
[P-mpls-ldp] quit
[P] interface vlanif 30
[P-Vlanif30] mpls
[P-Vlanif30] mpls ldp
[P-Vlanif30] quit
[P] interface vlanif 40
[P-Vlanif40] mpls
[P-Vlanif40] mpls ldp
[P-Vlanif40] quit
# Configure SPE2.
[SPE2] mpls lsr-id 3.3.3.9
[SPE2] mpls
[SPE2-mpls] quit
[SPE2] quit
[SPE2] mpls ldp
[SPE2-mpls-ldp] quit
[SPE2] interface vlanif 40
[SPE2-Vlanif40] mpls
[SPE2-Vlanif40] mpls ldp
[SPE2-Vlanif40] quit
[SPE2] interface vlanif 50
[SPE2-Vlanif50] mpls
[SPE2-Vlanif50] quit
After the configuration, run the display mpls ldp session command on SPE1, P, and SPE2.
You can find that the Status of the peer relationship between SPE1 and P or between SPE2
and P is Operational, which indicates that the peer relationship is established. Run the
display mpls lsp command, and you can view the setup of the LSP.
Take the display on SPE1 as an example.
<SPE1> display mpls ldp session
LDP Session(s) in Public Network
------------------------------------------------------------------------------
Peer-ID
Status
------------------------------------------------------------------------------
2.2.2.9:0
Operational DU
------------------------------------------------------------------------------
TOTAL: 1 session(s) Found.
LAM : Label Advertisement Mode
<SPE1> display mpls lsp
----------------------------------------------------------------------
LSP Information: LDP LSP
----------------------------------------------------------------------
FEC
In/Out Label
2.2.2.9/32
NULL/3
1.1.1.9/32
3/NULL
3.3.3.9/32
NULL/1025
Establish remote LDP sessions between SPEs.
# Configure SPE1.
[SPE1] mpls ldp remote-peer 3.3.3.9
[SPE1-mpls-ldp-remote-3.3.3.9] remote-ip 3.3.3.9
[SPE1-mpls-ldp-remote-3.3.3.9] quit
# Configure SPE2.
[SPE2] mpls ldp remote-peer 1.1.1.9
[SPE2-mpls-ldp-remote-1.1.1.9] remote-ip 1.1.1.9
[SPE2-mpls-ldp-remote-1.1.1.9] quit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
LAM
SsnRole
SsnAge
Passive
000:00:01
SsnAge Unit : DDD:HH:MM
In/Out IF
-/Vlanif30
-/-
-/Vlanif30
Configuration Guide - VPN
KA-Sent/Rcv
7/7
Vrf Name
Issue 03 (2009-08-20)
Advertisement
Table of Contents
