Table of Contents
Advertisement
General description
6.1.4
Battery installation procedure
b
CAUTION:
The internal circuits of the servo amplifier may be damaged by static electricity.
Always take the following precautions:
Ground human body and work bench.
Do not touch the conductive areas, such as connector pins and electrical parts,
directly by hand.
For battery installation please follow the instructions which are given below:
Open the operation window. (When the model used is the MR-J2-200B or MR-J2-350B,
also remove the front cover.)
Install the battery in the battery holder.
Install the battery connector into CON1 until it clicks.
Fig. 6-3: Battery installation for MR-J2S-350B or less
Fig. 6-4: Battery installation for MR-J2S-500B, MR-J2S-700B, MR-J2S-700B4 or less
MELSERVO J2-Super
MR-J2S-100B or less
MR-J2S-500B, MR-J2S-700B, MR-J2S-700B4 or less
Absolute position detection system
Operation window
Battery connector
CON1
Battery
Battery holder
MR-J2S-200B and MR-J2S-350B
Operation window
Battery connector
Battery
CON1
Battery holder
S000997C
S001256C
6 - 3
Advertisement
Table of Contents
