Preparing For Use - Agilent Technologies 1670G Series User Manual

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

Operator's Service

Preparing For Use

This section gives you instructions for preparing the logic analyzer for

Power requirements

The logic analyzer requires a power source of either 115 VAC or 230

VAC, -22 % to +10%, single phase, 48 to 66 Hz, 200 Watts maximum

power, CAT II (line voltage in appliance and to wall outlet).

Operating environment

The operating environment is listed in previous chapter. Note the

noncondensing humidity limitation. Condensation within the

instrument can cause poor operation or malfunction. Provide

protection against internal condensation.

The logic analyzer will operate at all specifications within the

temperature and humidity range given. However, reliability is

enhanced when operating the logic analyzer within the following

• Temperature: +20°C to +35 °C (+68 °F to +95 °F)

• Humidity: 20% to 80% noncondensing

Store or ship the logic analyzer in environments within the following

• Temperature: -40 °C to +75 °C

• Humidity: Up to 90% at 65 °C

• Altitude: Up to 15,300 meters (50,000 feet)

Protect the logic analyzer from temperature extremes which cause

condensation on the instrument.