Table of Contents
Advertisement
Using the Oscilloscope
The Scope Display Menu
Display Options field
The Display Options field allows you to display either sample period
information or marker value information on the oscilloscope menus,
and also provides access to the scope channel labeling menu.
The Display Options field appears on the Channel, Trigger, Display and
Auto-Measure menus. Selecting the Display Options field provides a
pop-up menu, which provides the Set Channel Labels menu. If either
voltage or time markers are enabled, selecting the Display Options field
reveals all three of the following selections:
Set Channel Labels
Selecting Set Channel Labels from the Display Options pop-up will take
you to the Scope Channel Labels menu. This menu allows you to assign
labels to each of the oscilloscope channels. These labels will
subsequently appear in the channel label area to the left of the
waveform display area. The scope channel labels appear on single trace
waveforms only. The default oscilloscope labels are used for overlay
and waveform math displays.
Display Sample Period
Selecting the Display Sample Period option displays the sample period
information on the scope menus. Sample period information is the
default display option and is always displayed when markers are turned
off.
Display Marker Values
This option displays the marker value information on the oscilloscope
menus.
163
Advertisement
Table of Contents
Troubleshooting
