Agilent Technologies 1670G Series User Manual page 220

Using the Pattern Generator
Building Test Vectors and Functions
Clock Out Delay
The Clock Out Delay setting allows you to position the output clock
with respect to data. The zero setting is uncalibrated and should be
measured to determine the initial position with respect to the data.
Each numerical change of one on the counter results in an approximate
change of 1.3 ns.
Symbols
Touching the Symbols field brings up a pop-up menu that lets you build
a symbol table to use when putting data into the Sequence and User
Macros menus. Providing symbol names to frequently used values lets
you enter the values more easily and recognize these values by their
symbol name rather than having to remember data values.
Vector Output Mode
The Vector Output Mode determines the channel width, available pods,
and the frequency range for both the internal and external clock. The
following table shows the difference between the Full Channel 100
MBits/s mode and the Half Channel 200 MBits/s mode.
Pods Available
Maximum Channels
Maximum External Clock
Frequency
Maximum Internal Clock
Frequency
Minimum External Clock
Frequency
Minimum Internal Clock
Frequency
220
Full Channel
Half Channel
100 MBits/s
200 MBits/s
Pods 1, 2, 3, 4 Pods 1, 3
32; eight per 16; eight on pods
1, 3
pod
100 MHz 200 MHz
100 MHz 200 MHz
DC DC
4 kHz 4 kHz