To Capture A Write Of Known Bad Data To A Particular Variable - Agilent Technologies 1670G Series User Manual

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

Triggering Examples

Single-Machine Trigger Examples

To capture a write of known bad data to a

particular variable

The trigger specification ANDs the bad data on the data bus, the write

transaction on the status bus, and the address of the variable on the

address bus.

1 Go to the state analyzer's Trigger menu.

2 Define the terms BAD_DATA, WRITE, and VAR_ADDR to

represent the bad data value, write status, and the address of the

3 Under State Sequence Level 1, enter the following sequence

specification (use the Combination trigger term):

• While storing "anystate" TRIGGER on "BAD_DATA • WRITE •

VAR_ADDR" Occurs "1" Else on "no state" go to level "1"

Capturing a Bad Write to a Variable

Troubleshooting