To Generate A Symbol File - Agilent Technologies 1670G Series User Manual

1 Compile, assemble, and link your program using the "generate
2 Transfer the DOS-formatted symbol file to the logic analyzer. You
NOTE:
See also
Using the Symbol Utility

To generate a symbol file

In order to view symbols from your software in the Listing or Waveform
menus of the logic analyzer, you need to create a symbol file in one of
the formats that are supported by the Symbol Utility. If your language
tools cannot generate an OMF symbol file which is compatible with the
Symbol utility, you may create a symbol file in the General-Purpose
ASCII (GPA) file format.
symbol file" option of your language tools.
can put the file on a flexible disk, or use a LAN interface to
transfer the file directly to the hard disk.
If you need help creating OMF files, refer to your software tool documentation
for information about how to generate OMF files during compilation and
linking.
"The General-Purpose ASCII File Format" on page 609 for a complete
description of the ASCII symbol file format.
"Supported Symbol File Formats," on page 567 for a list of the symbol
file formats that are supported.
580