To Transfer Files Using Ftp - Agilent Technologies 1670G Series User Manual

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

File Management

Transferring Files Using the LAN

To transfer files using ftp

1 Check that your network package include ftp, and connect your

logic analyzer to the LAN.

See the LAN section of this User's Guide on page 476 for instructions.

2 From the computer you want to transfer the files to or from,

establish an ftp connection.

3 At the login prompt, log in as data or control.

If you want to load files into the logic analyzer, log in as control.

Otherwise, log in as data.

4 If you will be transferring screen images or configuration files, set

type to BIN.

5 Locate the file you want, and transfer it.

"The File System" on page 387 explains the different types of files in

the file system. Most ftp software lets you use your regular computer

commands for moving around the remote file system and listing files.

To copy files, most ftp software uses get and put.