To include software instructions in a sequence
The following software instructions are available:
• User Macro
• Repeat Loop
If you are inserting a User Macro and have not yet built the function, go
to "To build a user macro" later in this chapter. Functions must be built
before they can be inserted. To include these instructions in a
sequence, use the following procedure.
1 Highlight the vector that will be output at the time of the
instruction.
2 Select the INST field.
3 Select the desired software instruction to insert.
4 If required, select any qualifying actions for the instruction.
Using the Pattern Generator
Building Test Vectors and Functions
205