To Change Trigger Functions - Agilent Technologies 1670G Series User Manual

1 From the Trigger menu, select the sequence level number of the
2 Select Select New Function.
3 Use the knob to highlight the function you want, and select
4 Select the appropriate assignment fields and insert the desired
See Also
Using the Trigger Menu
Changing the Trigger Sequence

To change trigger functions

You do not need to add and delete levels just to change a level's trigger
function. This can be done from within the Sequence Level pop-up.
sequence level you want to modify.
A Sequence Level pop-up appears. Its contents reflect the current
trigger function.
The Trigger Function pop-up replaces the Sequence Level pop-up. The
functions available depend on whether the analyzer is configured as
state or timing.
Done.
A new Sequence Level pop-up appears. Its contents reflect the
function you just selected. The wording of this screen is very similar to
the function description, and the line drawing demonstrates what the
function is measuring.
pre-defined terms, numeric values, and other parameter fields
required by the function. Select Done.
For state analyzers, a final "go to trigger" level is automatically placed
at the end of the trigger specification for you. This level must always be
a user level. Although you can change its fields, you cannot change the
function. Timing analyzers do not have this restriction.
"Timing Trigger Function Library" and "State Trigger Function Library"
in The Analyzer Trigger Menu on page 312 for a complete listing of
functions.
80