Table of Contents
Advertisement
Troubleshooting the LAN Connection
Troubleshooting the Initial Connection
9 Exit the Test System.
a Select System Test, then select Exit Test from the pop up.
b Select Exit Test System.
Status Number
When you run the LAN Test, the test menu reports a status number.
The following figure shows the bit positions of the hexidecimal status
word.
A "1" in a bit position signifies that the bit is set and the test failed.
A "0" in a bit position signifies that the bit is not set and the test passed.
Status Word
550
Advertisement
Table of Contents
Troubleshooting
