Agilent Technologies 1670G Series User Manual page 256

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

Logic Analyzer Reference

Connecting Probe Cables to the Logic Analyzer

All probe cables are installed at the factory. If you need to replace a

probe cable, refer to the 1670G-Series Logic Analyzers Service Guide.

You can purchase the Service Guide from your Agilent Technologies

Sales Office.

Connecting the Probe Tip Assembly to the Probe Cable

To connect a probe tip assembly to a cable, align the key on the cable

connector with the slot on the probe housing and press them together.

Connecting Probe Tip Assembly

Troubleshooting