Table of Contents
Advertisement
To change the trigger specification
Most triggers use terms other than "a." Even a simple trigger might use
additional terms to set conditions on the actual trigger. To use these
terms, you must include them in the trigger sequence specification.
1 In the Trigger menu, select the number beside the specific level
you want to modify.
A Sequence Level menu pops up. It shows the current specification for
that trigger level.
2 Select the field you want to change.
In the top row of the pop-up are three action fields: Insert Level, Select
New Function, and Delete Level. The next section goes into detail on
them. The fields after "While storing", "TRIGGER on", and "Else on" are
completed with trigger terms. Selecting these fields pops up a menu of
terms.
3 Select the term you want to use from the pop-up, or enter a new
value, as appropriate to the field.
If you have renamed a term, that name is automatically used
everywhere the term would appear.
Using the Trigger Menu
Specifying a Basic Trigger
75
Advertisement
Table of Contents
Troubleshooting
