To Clean The Logic Analyzer; To Test The Logic Analyzer - Agilent Technologies 1670G Series User Manual

Logic analyzers

Hide thumbs Also See for 1670G Series:

Table of Contents

Operator's Service

Preparing For Use

To clean the logic analyzer

With the instrument turned off and unplugged, use mild soap and water

to clean the front and cabinet of the logic analyzer.

Harsh soap might damage the water-base paint. Do not immerse the

logic analyzer in water.

If you require a test to verify the specifications, the Agilent

Technologies 1670G-Series Logic Analyzers Service Guide is required.

If you require a test to initially accept the operation, perform the self-

tests described in Troubleshooting in this chapter.

If the logic analyzer does not operate correctly, go to the flow charts

provided in Troubleshooting in this chapter.